Sludge Vacuum Pump Native Slider

Sludge Vacuum Pump product configuration 1
Sludge Vacuum Pump product configuration 2
Sludge Vacuum Pump product configuration 3
Sludge Vacuum Pump product configuration 4
Sludge Vacuum Pump product configuration 5
Sludge Vacuum Pump product configuration 6
Sludge Vacuum Pump product configuration 1 Sludge Vacuum Pump product configuration 2 Sludge Vacuum Pump product configuration 3 Sludge Vacuum Pump product configuration 4 Sludge Vacuum Pump product configuration 5 Sludge Vacuum Pump product configuration 6

Sludge Vacuum Pump

A pneumatic sludge vacuum pump transfers suitable cuttings, oily sludge and other difficult materials using a compressed-air-driven vacuum cycle. Transfer capacity depends on suction distance, material fluidity and available air. Request a manufacturer or exporter price from China with the complete transfer duty.

  • Compressed-air-driven material transfer.
  • Sludge, cuttings and matched high-solids duties.
  • Vacuum suction and discharge cycle.
  • Air consumption and hose arrangement to confirm.
Description
Technical Data
More Details
Contact Us Now
Description
CategorySpecification
Product NameSludge Vacuum Pump
Model Rangeall published transfer, air-supply, pressure and dimension entries
Applicable IndustriesOil & Gas; Energy & Mining
ApplicationDrilling-fluid treatment and solids-control systems
API Requirementsapplicable API/project oilfield equipment requirements and documented hazardous-area suitability where requested
ConfigurationConfirm selected model and approved drawing
Selectionmaterial composition, solids fraction, particle size, suction/discharge distance, elevation, hoses and compressed-air supply
DocumentationSpecify inspection and traceability requirements
Factory Supply ScopeConfirm equipment, accessories and spare parts
Manufacturer InquiryProvide the approved equipment configuration and technical requirements
Supplier InquiryConfirm configuration and commercial scope
Exporter InquirySpecify packing and destination
PriceRequest a configuration-based quotation
Chinese EquipmentConfirm model-specific interfaces
China SourcingCompare the same technical and delivery scope
API certified ProcurementVerify certificate validity and applicable product scope
Packaging & DeliveryConfirm order-specific packing and delivery terms

A sludge vacuum pump, also called a solids or cuttings transfer pump, uses compressed air and a vacuum-generating arrangement to draw suitable material into its chamber and discharge it through the planned transfer line. The intended supply may operate without a local electrical drive, but compressed-air utility requirements remain essential.

The published description mentions high-solids material and vacuum capability around an 8 m water column under specified air-flow conditions. Those statements are reference capabilities, not guaranteed suction lift or throughput for every sludge. Material fluidity, specific gravity, particle size, hose diameter, suction distance and transfer elevation affect performance.

Applications can include oilfield cuttings, oily sludge and suitably qualified mining, construction or industrial materials. Pneumatic operation alone does not prove suitability for every hazardous area. Confirm the actual equipment, grounding, static-control and site classification requirements with the factory.

Sludge Vacuum Pump selection requires material composition, solids fraction, particle size, suction/discharge distance, elevation, hoses and compressed-air supply. Compare the complete model-specific data with the approved process and installation requirements. When sourcing from a Chinese sludge vacuum pump manufacturer, supplier or exporter, ask the factory to identify the equipment, accessories, inspection and spare parts included in the price. For procurement in China, specify applicable API/project oilfield equipment requirements and documented hazardous-area suitability where requested. If API certified supply is requested, verify the actual certificate validity and product scope; a general reference to an API standard does not prove certification.

Technical Data
Model 40A 20A 10A
Max Capacity 40m³/h 20m³/h 10m³/h
Inlet/Outlet Size 4″(114mm) 4″(114mm) 3″(89mm)
Vacuum Degree 85Kpa/25 inch HG (Mercury Column)
Max Suction Distance 50m
Max Discharge Distance 1000m 500m
Max Solids Content 80%
Max Solids Size 75mm 50mm
Pressure Requese 550Kpa-785Kpa (80-114PSI) 550Kpa-690Kpa (80-100PSI)
Air Demand 17m³/min (600CFM) 8m³/min (280CFM) 4.3m³/min (150CFM)
Dimension(L×W×H) 1690×1468×1983mm 1421×900×1448mm 1283×800×1370mm

High-solids claims and vacuum references are duty-dependent. Obtain a confirmed transfer-duty proposal; absence of an electric motor is not blanket explosion-proof certification.

More Details
What is Sludge Vacuum Pump used for?
A pneumatic sludge vacuum pump transfers suitable cuttings, oily sludge and other difficult materials using a compressed-air-driven vacuum cycle. Transfer capacity depends on suction distance, material fluidity and available air. Request a manufacturer or exporter price from China with the complete transfer duty.
How is the configuration selected?
Specify material composition, solids fraction, particle size, suction/discharge distance, elevation, hoses and compressed-air supply and confirm the selected model against the approved duty.
What determines the price?
Configuration, quantity, accessories, inspection and destination determine the quotation scope. Compare the same factory supply and delivery requirements.
What API documentation should be requested?
Specify applicable API/project oilfield equipment requirements and documented hazardous-area suitability where requested. For API certified procurement, verify certificate validity and the actual product scope.
What should be confirmed before ordering?
High-solids claims and vacuum references are duty-dependent. Obtain a confirmed transfer-duty proposal; absence of an electric motor is not blanket explosion-proof certification.
Contact Us Now

Contact Us For A Quick Quote

Full Sludge Vacuum Pump

Design Support

Email Support

Petro Solutions

Local Team Support on Sludge Vacuum Pump

Sludge Vacuum Pump

Sludge Vacuum Pump selection requires material composition, solids fraction, particle size, suction/discharge distance, elevation, hoses and compressed-air supply. Compare the complete model-specific data with the approved process and installation requirements. When sourcing from a Chinese sludge vacuum pump manufacturer, supplier or exporter, ask the factory to identify the equipment, accessories, inspection and spare parts included in the price. For procurement in China, specify applicable API/project oilfield equipment requirements and documented hazardous-area suitability where requested. If API certified supply is requested, verify the actual certificate validity and product scope; a general reference to an API standard does not prove certification.