Manual Tong

Manual Tong OEM product image 1
Manual Tong OEM product image 2
Manual Tong OEM product image 3
Manual Tong OEM product image 4
Manual Tong OEM product image 5
Manual Tong OEM product image 6
Manual Tong OEM product image 7
Manual Tong OEM product image 8
Manual Tong OEM product image 9
Manual Tong OEM product image 10
Manual Tong OEM product image 11
Manual Tong OEM product image 12
Manual Tong OEM product image 13
Manual Tong OEM product image 14
Manual Tong OEM product image 15
Manual Tong OEM product image 16
Manual Tong OEM product image 17
Manual Tong OEM product image 18
Manual Tong OEM product image 19
Manual Tong OEM product image 1 Manual Tong OEM product image 2 Manual Tong OEM product image 3 Manual Tong OEM product image 4 Manual Tong OEM product image 5 Manual Tong OEM product image 6 Manual Tong OEM product image 7 Manual Tong OEM product image 8 Manual Tong OEM product image 9 Manual Tong OEM product image 10 Manual Tong OEM product image 11 Manual Tong OEM product image 12 Manual Tong OEM product image 13 Manual Tong OEM product image 14 Manual Tong OEM product image 15 Manual Tong OEM product image 16 Manual Tong OEM product image 17 Manual Tong OEM product image 18 Manual Tong OEM product image 19

Manual Tong

Manual tongs grip tubular connections for make-up and break-out operations. Jaw and latch combinations define the pipe-size range and must be checked against the required torque.

  • B, SB, DB and additional reference types
  • Interchangeable jaw and latch combinations
  • Size-specific rated torque
  • Replacement dies and handling components
Description
Technical Data
More Details
Contact Us Now
Description
CategorySpecification
Product NameManual Tong
Model RangeB, SB, DB, SDD, LF, C, workover and casing tong references
Applicable IndustriesOil & Gas; Energy & Mining
ApplicationTubular handling in drilling and well-servicing operations
API Requirementsapplicable API 7K requirements for drilling and well-servicing equipment
ConfigurationConfirm selected model and approved drawing
Selectionpipe diameter, tong type, latch step, jaw configuration, required torque and rig handling arrangement
DocumentationSpecify inspection and traceability requirements
Factory Supply ScopeConfirm equipment, accessories and spare parts
Manufacturer InquiryProvide the approved equipment configuration and technical requirements
Supplier InquiryConfirm configuration and commercial scope
Exporter InquirySpecify packing and destination
PriceRequest a configuration-based quotation
Chinese EquipmentConfirm model-specific interfaces
China SourcingCompare the same technical and delivery scope
API certified ProcurementVerify certificate validity and applicable product scope
Packaging & DeliveryConfirm order-specific packing and delivery terms

A manual tong applies connection torque through a selected tong body, latch arrangement and gripping dies. The referenced range includes B, SB, DB, SDD, LF, C, workover and casing configurations. The SB table shows how latch-lug jaws and steps affect gripping range and torque; do not assume one configuration covers every listed tubular.

Manual Tong selection requires pipe diameter, tong type, latch step, jaw configuration, required torque and rig handling arrangement. Compare the complete model-specific data with the approved process and installation requirements. When sourcing from a Chinese manual tong manufacturer, supplier or exporter, ask the factory to identify the equipment, accessories, inspection and spare parts included in the price. For procurement in China, specify applicable API 7K requirements for drilling and well-servicing equipment. If API certified supply is requested, verify the actual certificate validity and product scope; a general reference to an API standard does not prove certification.

Technical Data
Manual Tong Type B
No-of Latch Lug Jaw Latch Step Size Range
mm  (in)
Rated Torque
(kN.m)
5a 1 86~105   (3-3/8~4-1/8) 55
2 105~133   (4-1/8~5-1/4) 75
5b 1 108~133   (4-1/4~5-1/4)
2 127~146   (5~5-3/4)
3 152~171   (6~6-3/4)
5b1 1 133~146   (5-1/4~5-3/4)
2 152~168   (6~6-5/8)
3 172~203   (6-3/4~8) 55
5c 1 168~187   (6-5/8~7-3/8) 75
2 187~203   (7-3/8~8)
3 216~219   (8-1/2~8-5/8) 55
5d 1 216~244   (8-1/2~9-5/8)
2 270~273   (10-5/8~10-3/4)
 5e 1 298   (11-3/4)
2 324   (12-3/4)
5e1 1 273   (10-3/4)
2 299   (11-3/4)
5e3 1 330~340   (13~13-3/8)

 

Manual Tong Type SB
No.of Latch Lug Jaw Latch Step Size Range Rated Torque
Inch mm lb.ft kN.m
1# 1 3-1/2~4-1/8 88.9~104.78 55000 75
2 4-1/8~5 104.78~127
2# 1 4-1/4~5-1/4 107.95~133.35
2 5~5-3/4 127~146.05
3 6~6-3/4 152.4~171.45
3# 1 6-5/8~7-1/4 168.28~184.15
2 7-3/8~8 187.33~203.2
3 8-1/2~9 215.9~228.6
4# 1 9~9-5/8 228.6~244.48 40000 55
2 10-5/8~10-3/4 269.88~273.05
5# 1 11-3/4 298.45
6# 1 12-3/4~13 323.85~330.2 30000 40
7# 1 13-3/8 339.73

 

Manual Tong Type DB
No. of Latch Lug Jaw No. of Hinge Pin Hole Size Range mm   (in) Rated Torque  kN.m
1# 1 89~152   (3-1/2~6) 90
2 114~178   (4-1/2~7)
3 140~210   (5-1/2~8-1/4)
2# 1 203~244   (8~9-5/8) 90
2 244~286   (9-5/8~11-1/4)
3# 1 298~324   (11-3/4~12-3/4) 55
2 340~365   (13-3/8~14-3/8)
4# 2 406~432   (16~17) 55

 

Manual Tong Type SDD
No. of Latch
Lug Jaw
No. of Hinge
Pin Hole
Latch Step Size Range Rated Torque
in mm kN·m
1# Ⅰ 1 4~5-1/2 101.6~139.7 135
2 5-1/2~5-3/4 139.7~146
Ⅱ 1 5-1/2~6-5/8 139.7~168.3
2 6-1/2~7-1/4 165.1~184.2
Ⅲ 1 6-5/8~7-5/8 168.3~193.7
2 7-3/4~8-1/2 196.9~215.9
2# Ⅰ 1 8-1/2~9 215.9~228.6
Ⅱ 2 9-1/2~10-3/4 241.3~273
2 10-3/4~12 273~304.8
3# Ⅰ 1 12~12-3/4 304.8~323.8 100
Ⅱ 1 13-3/8~14 339.7~355.6
2 15 381
4# Ⅱ 1 15-3/4 400 135
5# Ⅱ 1 16 406.4 80
2 17 431.8

 

Manual Tong Type LF
No. of Latch
Lug Jaw
Latch Step Size Range Rated Torque
in mm kN·m
1# 1 2-3/8 ~ 2-7/8 60.32 ~ 73 22
2 2-7/8 ~ 3-1/2 73 ~ 88.9
2# 1 3-1/2 ~ 4-1/4 88.9 ~ 107.95
2 4-1/4 ~ 5 107.95 ~ 127
3# 1 4-3/4 ~ 5-1/2 120.65 ~ 139.7
2 5-1/2 ~ 6-1/4 120.65 ~ 139.7
4# 1 5-3/4 ~ 6-3/8 146.05 ~ 161.93
2 6-3/8 ~ 7 161.93 ~ 177.8

 

Manual Tong Type C
No. of Latch
Lug Jaw
No. of Short
Jaw
No. of Hinge
Jaw
Size Range Rated Torque
in mm kN·m
1# 1# / 2-3/8 ~ 3.668 60.33 ~ 93.17 48
2# 2-7/8 ~ 4-1/4 73.03 ~ 108
3# 3-1/2 ~ 5-1/4 88.9 ~ 133.35
4# 5-1/2 ~ 7 139.7 ~ 177.8
5# 2# 1# 7 ~ 8-5/8 177.8 ~ 219.08
6# 2# 9-5/8 ~ 10-3/4 244.5 ~ 273.05

 

Workover Tongs
No. of Latch
Lug Jaw
Size Range Rated Torque
in mm kN.m
1# 2-3/8 ~ 4-1/2 60.3 ~ 114.3 35
2# 4-1/2 ~ 6-1/2 114.3 ~ 165.1
3# 6-1/2 ~ 8-5/8 165.1 ~ 219.1
4# 9-5/8 ~ 10-3/4 244.5 ~ 273.1

 

Manual Tong Type WWC
No.of Latch
Lug Jaw
Size Range Rated Torque
mm in kN·m
1# 60.3 ~ 88.9 2-3/8 ~ 3-1/2 27
2# 73 ~ 107.95 2-7/8 ~ 4-1/4
3# 101.6 ~ 146.05 4 ~ 5-3/4
4# 146.05 ~ 177.8 5-3/4 ~ 7 20
5# 184.15 ~ 219.1 7-1/4 ~ 8-5/8
6# 244.475 ~ 273.05 9-5/8 ~ 10-3/4 14

 

Manual Tong Type WWB
No.of Latch
Lug Jaw
Size range Rated Torque
mm in kN·m
1# 60.3 ~ 95.25 2-3/8 ~ 3-3/4 48
2# 88.9 ~ 117.48 3-1/2 ~ 4-5/8
3# 114.3 ~ 146.05 4-1/2 ~ 5-3/4
4# 133.35 ~ 184.15 5-1/4 ~ 7-1/4
5# 174.6 ~ 219.1 6-7/8 ~ 8-5/8
6# 228.6 ~ 273.05 9 ~ 10-3/4 35

 

Manual Tong Type AAX
No. of Latch
Lug Jaw
Size Range Rated Torque
mm in kN·m
1# 73 ~ 95.25 2-7/8 ~ 3-3/4 75
2# 88.9 ~ 114.3 3-1/2 ~ 4-1/2
3# 101.6 ~ 133.35 4 ~ 5-1/4
4# 127 ~ 184.15 5 ~ 7-1/4
5# 174.6 ~ 219.1 6-7/8 ~ 8-5/8
6# 228.6 ~ 273.05 9 ~ 10-3/4 40
7# 273.05 ~ 298.45 10-3/4 ~ 11-3/4
8# 339.7 2013/3/8

 

Casing Tong
No. of Latch
Lug Jaw
Size Range Rated Torque
in mm kN.m
4# 13-3/8 340, 365 8

 

Extended Casing Tong
Model No. of Hinge Jaw Size Range Rated Torque
mm in kN.m
Q13-3/8 ~ 25-1/2 -35 9, 8 340 ~ 368 13-3/8 ~ 14-1/2 35
8, 7 368 ~ 406 14-1/2 ~ 16
8, 9, 9 406 ~ 445 16 ~ 17-1/2
8, 9, 7 445 ~ 483 17-1/2 ~ 19
7, 8, 7 483 ~ 508 19 ~ 20
9, 8, 9, 7 508 ~ 546 20 ~ 21-1/2
9, 7, 8, 7 546 ~ 584 21-1/2 ~ 23
9, 9, 8, 7, 7 610 ~ 648 24 ~ 25-1/2
9, 8, 7, 7, 7 648 ~ 689 25-1/2 ~ 27
8, 7, 7, 7, 7 689 ~ 724 27 ~ 28-1/2
9, 9, 8, 7, 7, 8 724 ~ 762 28-1/2 ~ 30
9, 7, 7, 7, 7, 8 762 30
Q25-1/2 ~ 36-55  9, 8, 7, 7, 7 648 ~ 686 25-1/2 ~ 27 55
8, 7, 7, 7, 7 686 ~ 724 27 ~ 28-1/2
9, 9, 7, 7, 7, 8 724 ~ 762 28-1/2 ~ 30
9, 7, 7, 7, 7, 8 762 ~ 803 30 ~ 31-5/8
8, 9, 8, 9, 7, 7, 7 800 ~ 838 31-1/2 ~ 33
7, 9, 8, 9, 9, 7, 8, 9 838 ~ 876 33 ~ 34-1/2
8, 7, 7, 9, 9, 8, 8, 8 876 ~ 914 34-1/2 ~ 36

Confirm the selected jaw and latch combination, torque rating, die specification and operating instructions.

More Details
What is Manual Tong used for?
Manual tongs grip tubular connections for make-up and break-out operations. Jaw and latch combinations define the pipe-size range and must be checked against the required torque.
How is the configuration selected?
Specify pipe diameter, tong type, latch step, jaw configuration, required torque and rig handling arrangement and confirm the selected model against the approved duty.
What determines the price?
Configuration, quantity, accessories, inspection and destination determine the quotation scope. Compare the same factory supply and delivery requirements.
What API documentation should be requested?
Specify applicable API 7K requirements for drilling and well-servicing equipment. For API certified procurement, verify certificate validity and the actual product scope.
What should be confirmed before ordering?
Confirm the selected jaw and latch combination, torque rating, die specification and operating instructions.
Contact Us Now

Contact Us For A Quick Quote

Full Manual Tong

Design Support

Email Support

Petro Solutions

Local Team Support on Manual Tong

Manual Tong

Manual Tong selection requires pipe diameter, tong type, latch step, jaw configuration, required torque and rig handling arrangement. Compare the complete model-specific data with the approved process and installation requirements. When sourcing from a Chinese manual tong manufacturer, supplier or exporter, ask the factory to identify the equipment, accessories, inspection and spare parts included in the price. For procurement in China, specify applicable API 7K requirements for drilling and well-servicing equipment. If API certified supply is requested, verify the actual certificate validity and product scope; a general reference to an API standard does not prove certification.